SAITRON CUT
Description:
SAITRON CUT is specially developed for metal cutting and piercing applications. It can be used on AC/DC-/+ with stable arc. Excellent strike and re-strike during cutting and piercing. No air pressure or oxygen is required; it can easily used with our regular arc welding machine.
Applications:
It is suitable for all position cutting, piercing, removing and beveling metals prior to welding on mild steel, carbon steel, stainless steel, cast irons, nickel alloys, aluminium, copper and bronze etc.
Note on Usage:
Mark the line where cutting is desired. Use AC/DC -/+ power source. While using electrode, take advantage of arc blow caused by special exothermic coating and hand pressure. When arc is struck, push and pull, holding electrode at 450 angle and using sawing motion to cut. The closer the arc, the faster and cleaner the cut. For piercing holes, hold electrode vertically and push in and out until the hole is pierced.
Sizes and Recommended Current Range (AC or DC+)
| Diameter (mm) | 3.15 | 4.0 | 5.0 |
| Current (Amps) | 150-230 | 225-325 | 250-350 |
SAITRON GOUGE
Description:
SAITRON GOUGE is specially developed for metal gouging applications. It can be used on AC/DC-/+ with stable arc. Excellent strike and re-strike during chamfering and grooving. No air pressure or oxygen is required; it can easily used with our regular arc welding machine. The electrode produces a high energy arc which rapidly melts the base material and prepares the groove. Gouge all metals including stainless steels, aluminium and copper.
Applications:
It is suitable for chamfering and gouging applications of metals and alloy which are difficult to machine. Can gouge all metals including stainless steels, aluminium and copper. Applicable in both ferrous and non-ferrous foundries for the removal of risers and gates from castings and for cutting heavy scrap prior to remelting.
Note on Usage:
Hold the electrode in the direction of travel at an angle not more than 20º with the plain of the job and travel the electrode using SAW-LIKE (forward and backward) motion. Delayed action permits placing of electrode at the exact starting point. Push the electrode along with the line quickly for a shallow chamfer, more slowly or with a weaving motion for a deeper gouge. Utilizing the heat and force of the highly concentrated arc, push the molten metal ahead and away. If deeper gouge is needed repeat procedure until the required depth has been achieved.
Sizes and Recommended Current Range (AC or DC+)
| Diameter (mm) | 3.15 | 4.0 | 5.0 |
| Current (Amps) | 150-230 | 225-325 | 250-350 |
